用户名: 密码: 登 录   个人中心   系统维护   用户注册  联系我们
当前位置 >首页 > 标准信息

全文阅读 全文下载 章节阅读

基本信息

AIR5747
EMC Laboratory RF Radiated Emission Report for Passive Radio Frequency Identification (RFID) Tags
EMC Laboratory RF Radiated Emission Report for Passive Radio Frequency Identification (RFID) Tags
有效
【范围】 This paper contains RF radiated emission and susceptibility data from passive Radio Frequency Identification (RFID) tags and readers operating at 13.56 MHz, 915 MHz, and 2.45 GHz. Laboratory test procedures incorporated the methods of RTCA DO-160D (test procedures for aviation electrical/electronic equipment) and DO-233 (test procedures for consumer portable electronic devices (PEDs)). Only one commercially available system was evaluated per established operating frequencies. 1.1 Purpose The purpose of this paper is to record the RF radiated emissions and susceptibility from selected passive RFID systems operating at 13.56 MHz, 915 MHz, and 2.45 GHz. The emissions data (intentional and spurious) includes operation with both “good” and damaged tags. In addition, RF radiated susceptibility tests were performed to determine functionality and inadvertent operation. These tests are limited in scope to the RF radiated emissions of PEDs tested in a controlled laboratory environment per the requirements of RTCA DO-160D, RTCA DO-233, and an airplane manufacturer's limit. This paper: identifies test units, describes how the tests were conducted, identifies support equipment and instrumentation, includes test data, and provides results.strRefField
【与前一版的变化】

引用文件/被引文件

Passive RFID Tags Intended for Aircraft Use
“Environmental Conditions and Test Procedures for Airborne Equipment
“Portable Electronic Devices Carried on Board Aircraft
SC202 Phase 1 Document

相关标准

通信侦察装备RF/IF接口要求
A Guide for the Selection of Quick-Disconnect Couplings for Aerospace Fluid Systems
BAROMETRY FOR ALTIMETER CALIBRATION
Numeral, Letter and Symbol Dimensions for Aircraft Instrument Displays
Performance of Low Pressure Ratio Ejectors for Engine Nacelle Cooling
Construction and Calibration of Parallel Plate Transmission Line for Electromagnetic Interference Susceptibility Testing
Electromagnetic Compatibility (EMC) System Design Checklist
Anti Blow-By Design Practice for Cap Seals
Identification and Coding of Fluid and Electrical Piping System Functions
Airline Tow Tractor - Baggage/Cargo Factors for Design Consideration

包含图表

TEST SETUP – 13.56 M
TEST SETUP – 915 MHZ
TEST SETUP – 2.45 GH
RFID 13.56 MHz PASSI
RFID 13.56 MHz PASSI
RFID 13.56 MHz PASSI
RFID 13.56 MHz PASSI
RFID 13.56 MHz PASSI
RFID 915 MHz PASSIVE
RFID 915 MHz PASSIVE
RFID 915 MHz PASSIVE
RFID 915 MHz PASSIVE
RFID 915 MHz PASSIVE
RFID 915 GHz PASSIVE
LEVEL OF RECEIVE ANT
RFID 915 MHz PASSIVE
CIRCUIT VARIATIONS
RFID 915 MHz PASSIVE
DAMAGED TAG LOCATION
LAYOUT OF DAMAGED TA
HIRF TEST SETUP AND
GSM 900 MOBILE PHONE
READER EFFICIENCY WI
READER EFFICIENCY WI
RFID 2.45 GHz PASSIV
RFID 2.45 GHz PASSIV
RFID 2.45 GHz PASSIV

标准反馈


  • 问题类型:
    反    馈: