全文阅读 全文下载 章节阅读

基本信息

【范围】

This SAE Aerospace Information Report (AIR) offers information about the use of support tooling for composite repair processes, as well as descriptions of some of the different tooling materials used and their applications. If the repair document requires the use of tooling, refer to this AIR for additional information. 1.1 Purpose: The purpose of this AIR is to provide a general information and guidance in selecting materials and provide an example of a manufacturing technique for tooling used in the repair of thermosetting composite components.strRefField

【与前一版的变化】

引用文件/被引文件

ARP4916

Masking and Cleaning of Epoxy and Polyester Matrix Thermosetting Composite Materials

ARP5143

Vacuum Bagging of Thermosetting Composite Repairs

ARP5144

Heat Application for Thermosetting Resin Curing

ARP5319

Impregnation of Dry Fabric and Ply Lay Up

ARP5144

Heat Application for Thermosetting Resin Curing

相关标准

·AIR5378

Aircraft Tube Bending Methods, Techniques and Tooling

·AIR5719

Teaching Points for an Awareness Class on "Critical Issues in Composite Maintenance and Repair"

·AMS-S-83318B

Sealing Compound, Polysulfide Type, Low Temperature Curing, Quick Repair, Integral Fuel Tanks and Fuel Cell Cavities

·AMS 2980A

Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 0 - Introduction

·AMS 2980/1A

Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 1 - General Requirements

·AMS 2980/3A

Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Purchasing Specification - Fabric

·AMS 2980/4A

Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Purchasing Specification – Resin

·AMS 2980/5

Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 5 - Material Specification: Carbon Fiber Fabrics, Plain Weave, 193 g/m 2 , and Epoxy Resin

·AMS3970A

Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 0 - Introduction

·AMS3970/1A

(R) Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 1 - General Requirements

包含图表

TABLE 1	FIGURE 1	FIGURE 2
FIGURE 3	FIGURE 4	FIGURE 5
FIGURE 6	FIGURE 7	FIGURE 8
FIGURE 9	Frame Attachment to	Extension Segment Bu
Cross Section/Master	Typical Briding Effe	Pressure Pad Applica
Bagging Example	Typical Cure Cycle a	Back Up Structure
Typical Post Cure Cy