全文阅读 全文下载 章节阅读

基本信息

【范围】	This SAE Aerospace Standard (AS) defines an involute with a 30° pressure angle and a full radius at the roots thus reducing the stress concentration in the area of the root.strRefField
【与前一版的变化】

替代标准

AS84B

引用文件/被引文件

ARP179

Involute Spline Gages (30° Pressure Angle)

相关标准

·AMS5913B

Steel, Corrosion-Resistant, Sheet and Strip 19Cr - 9.2Ni (SAE 30304) Cold Rolled, Full Hard, 185 ksi (1276 MPa) Tensile Strength (Composition similar to UNS S30400)

·ARP4102/14B

Full-Format Printer

·AS85049/94C

CONNECTOR ACCESSORIES, ELECTRICAL, MOUNTING DEVICE, FLANGE TYPE, CATEGORY 7, FULL PERIMETER

·AMS2476

Electrolytic Treatment for Magnesium Alloys Alkaline Type, Full Coat

·AMS2478

Anodic Treatment of Magnesium Alloys Acid Type, Full Coat

·AMS5906B

Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, Full Hard, 185 ksi (1276 MPa) Tensile Strength

·ARP676

LEVER ENDS (INVOLUTE SERRATIONS)

·AS9316A

(R) SCREW, MACHINE - HEXAGON HEAD, SLOTTED, FULL SHANK, ALLOY STEEL, UNS K14675, 135 KSI MIN, .1900-32 UNS-3A

·AS9489B

BOLT, MACHINE - HEXAGON HEAD, FULL, SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A

·MA4189

SCREW, MACHINE, 100° CSK, FLAT HEAD, OFFSET CRUCIFORM RECESS, FULL SHANK, UNS S66286, MJ THREAD, METRIC

包含图表

formula 1	formula 2	formula 3
formula 4	Tooth Nomenclature	Method of Dimensioni
Basic Tooth Proporti	Dimensions for 2.5/5	Dimensions for 3/6 D
Dimensions for 4/8 D	Dimensions for 5/10	Dimensions for 6/12
Dimensions for 8/16	Dimensions for 10/20	Dimensions for 12/24
Dimensions for 16/32	Dimensions for 20/40	Dimensions for 24/48
Dimensions for 32/64	Dimensions for 40/80	Dimensions for 48/96
TABLE 16	Recommended Involute