全文阅读 全文下载 章节阅读

基本信息

【范围】

This document establishes test plans/procedures for the AS5643/1 Slash Sheet. The AS5643/1 Slash Sheet establishes guidelines for the use of IEEE-1394b as a data bus network in military and aerospace vehicles. It encompasses the data bus cable and its interface electronics for a system utilizing S400 over copper medium over extended lengths. 1.1 Purpose The purpose of this document is to establish test plans/procedures for the AS5643/1 Slash Sheet. This document is controlled and maintained by the SAE with technical support from subsystem vendors. 1.2 Application The information herein may be used to assist the test of the subsystems that interface via the vehicle’s network. 1.3 Interpretation The following interpretations shall be placed upon these words, unless stated otherwise, where they are used in this document. May An allowed action Shall A mandatory requirement Should A recommended action Will A declaration of intentstrRefField

【与前一版的变化】

包含缩略语

BER：
DC：
LRU：
ppm：
UI：
UUT：
VRMS：
C：
dB：
ft：
GHz：
Link：
mA：
MBd：
Mbits：
Mb/s：
MHz：
ms：
mV：
N/A：
pF：
PHY：
ps：
V：
Ω：

引用文件/被引文件

MIL-STD-461E

Department of Defense Interface Standard

MIL-HDBK-454A

Department of Defense Handbook

MIL-HDBK-5400

Military Handbook

IEEE Std 1394-1995

IEEE Standard for a High Performance Serial Bus

IEEE Std 1394a-2000

IEEE Standard for a High Performance Serial Bus

IEEE Std 1394b-2002

IEEE Standard for a High Performance Serial Bus

包含图表

CABLE REQUIREMENTS	CABLE PREPARATION FO	EXAMPLE DIFFERENTIAL
LENGTH OF TEST SAMPL	TIME DELAY SKEW EXAM	CONNECTOR PIN-OUT, M
CONNECTOR PIN-OUT, M	CONNECTOR PIN-OUT, M	QUADRAX CONNECTOR PI
600 PS EXCEPTION WIN	600 PS EXCEPTION WIN	LINK MEASUREMENT POI
LINK SIGNAL TRANSMIT	BER TEST DURATION	LINK SIGNAL RECEIVER