|
【范围】
|
This test plan is broken into two major sections for the production testing of remote terminals: Electrical
and Protocol.
1.1 General: This production test plan defines the test requirements for verifying that Remote Terminals
meet the requirements of MIL-STD-1553B, "Digital Time Division Command/Response Multiplex Data
Bus."
1.2 Application: This is a general test plan for any remote terminal designed to meet the requirements of
MIL-STD-1553B. These requirements shall apply to the remote terminal under test, when invoked in a
specification or statement of work.
Tests specified may be performed in any order, combined with one another or combined with other tests of
the subsystem in which the Remote Terminal may be embedded.
The Remote Terminal which is under test must also have its design validated per the "Validation Test Plan
for the Digital Time Division Command/Response Multiplex Data Bus Remote Terminals."
The tests specified are to be used in production test of a remote terminal chip, module or function within an
equipment. It is intended that all stimuli and measurements be made via external connections and/or test
points. No required access to any other points is intended.
Special requirements such as those needed to meet armament bus requirements when specified in the
individual equipment specification may, when within 1553B requirements, replace values or tolerances
specified in this test plan for the purpose of generating a UUT production test procedure.strRefField
|