|
【范围】
|
1.1 Application:
This SAE Aerospace Standard (AS) defines the requirements for a convoluted
polytetrafluoroethylene (PTFE) lined, metallic reinforced, hose assembly suitable for use in
aerospace fluid systems at temperatures between -65 °F and 400 °F for Class 1 assembly, -65 °F
and 275 °F for Class 2 assembly, and at operating pressures per Table 1.
The use of these hose assemblies in pneumatic storage systems is not recommended. In addition,
installations in which the limits specified herein are exceeded, or in which the application is not
covered specifically by this standard, shall be subject to the approval of the procuring activity.
1.2 Classification:
1.2.1 Hose assemblies furnished under this document shall be of the following classes:
a. Class 1 - All corrosion resistant steel fittings, -65 to 400 °F
b. Class 2 - Combination aluminum alloy nut, flange, nipple, elbow and corrosion resistant steel
socket fittings, or all aluminum fittings, -65 to 275 °F
1.2.2 Hose assemblies furnished under this document shall be of the following types:
a. Type I - Conductive PTFE Innertube
b. Type II - Non-Conductive PTFE InnertubestrRefField
|