当前位置 >首页 > 标准信息

全文阅读 全文下载 章节阅读

基本信息

【标准号】: AIR4170A
【中文名称】: Reticulated Polyurethane Foam Explosion Suppression Material for Fuel Systems and Dry Bays
【英文名称】: Reticulated Polyurethane Foam Explosion Suppression Material for Fuel Systems and Dry Bays
【发布时间】
【实施时间】: 2007-12-01
【有效性】: 有效
【起草人】
【起草单位】
【提出单位】
【归口单位】
【批准单位】
【分类】
【备案号】
【自动关键词】

【范围】

This document describes the initial development, evolution, and use of reticulated polyurethane foam as an explosion suppression material in fuel tanks and dry bays. It provides historical data, design practice guidelines, references, laboratory test data, and service data gained from past experience. The products discussed in this document may be referred to as "Safety Foam," "Reticulated Polyurethane Foam," "Baffle and Inerting Material," "Electrostatic Suppression Material," or "SAFOAM." These generic terms for the products discussed in this document are not meant to imply any safety warranty. Each individual design application should be thoroughly proof tested prior to production installation.strRefField

【与前一版的变化】

替代标准

AIR4170

引用文件/被引文件

*AIR1662: Minimization of Electrostatic Hazards in Aircraft Fuel Systems
*AIR1664: Aircraft Flexible Tanks - General Design and Installation Recommendations
Report No. 1819 (20 May 1966): Development and Testing of Cellular Packing Material
*ASJ-TM-66-1 (November 1966): Investigation of Polyurethane Foam for Aircraft Fuel System Applications
*RPL-TDR-64-25 (November 1968): Aerospace Fluid Component Designers Handbook
*MIL-T-27422B (24 Feb. 1970): Tank
*ASNJI-70-2 (May 1970): USAF Experience with Polyurethane Foam Inerting Material
*ENJI-70-10 (November 1970): Effects of Polyurethane Foam on Fuel System Contamination
*ENJPF-TM-72-1 (March 1972): The Use of Polyurethane Foam for Fuel System Inerting (Unpublished Report)
*AFAPL-TR-72-12 (March 1972): Advanced Flame Arrestor Materials and Techniques for Fuel Tank Protection
*AFAPL-TR-73-50 (July 1973): Incendiary Gunfire Simulation Techniques for Fuel Tank Explosion Protection Testing
*AFML-TR-73-283 (December 1973): Environmental Aging of Candidate for Suppressant Dry Bay Area Materials for Aircraft
*AFAPL-TR-73-76 (December 1973): Vulnerability Assessment of JP-4 and JP-8 Under Verticle Gunfire Impact Conditions
*AFML-TR-73-278 (January 1974): A Method to Predict the Service Life of Internal Fuel Cell Baffle Materials
AFAPL-TR-73-124 (February 1974): Gross Voided Flame Arrestors for Fuel Tank Explosion Protection
*ASD-TR-74-34 (September 1974): Gunfire Effectiveness and Environmental Suitability of Void Filler Materials
AFAPL-TR-74-126 (July 1975): Void Filler Ballistic Fire Protection for Aircraft Fuel System Dry Bays
AFAPL-TR-75-93 (July 1975): Integrated Aircraft Fuel Tank Fire and Explosion Protection Systems Phase I and II
*AFFDL-TR-76-98 (January 1978): Ballistic Evaluation of Aircraft Explosion Suppression Materials
*AFAPL-TR-78-89 (December 1978): Factors Affecting Electrostatic Hazards
ENFEF-TM-78-08 (June 1979): Guidelines for Use in Design
*Bulletin 4-9 Part 1 (September 1979): The Shock and Vibration Bulletin. A publication of The Shock and Vibration Information Center
*ENFEF-TM-79-08 (December 1979): Qualification Test Results for Scott Paper Co.
AFWAL-TR-80-4135 (September 1980): Compatibility of Reticulated Foams in Typical Turbine Fuels with Currently Approved Additives
*Memorandum Repor ARBRL-MR-03246 (February 1983): Hydrodynamic Ram Attenuation
*Letter report (POSH) Dept. of the Air Force Wright-Patterson AFB (14 June 1983): C-130 Fuel Tank Shroud Electrostatic Evaluation
*Final Report (September 30: 1981)
AFWAL-TR-83-3114 (September 1983): Survivable Aircraft Fuel System Engineering Design Guide (SAFE/DG)
AFWAL-TM-84-237- FIESL (December 1984): A Comparison of White Reticulated Foam to Rigid Foam as Fire Protection for Aircraft Dry Bays
*AFWAL-TR-84-2048 (December 1984): Damage Caused to Polyurethane Foams by Aging
*AFWAL-TM-85-237- FIESL (September 1985): A Comparison of Electric Field Measurements on Conductive and Nonconductive Explosion Suppressant Foams in C-130 External Fuel Tanks
*AFWAL-TR-85-2060 (January 1986): Vulnerability Methodology and Protective Measures for Aircraft Fire and Explosion Hazards
*AFWAL-TR-82-2022 (March 1986): Electrostatic Hazards of Urethane Packed Fuel Tanks
*86-MMSRE-011 (12 May 1986): Baffle and Inerting
*AFWAL-TR-86-2077 (November 1986): Study of Aeropropulsion Lab Pressure Drop Rig and Recommended Test Procedure
ESL-TR-84-63 (January 1987): Effective Disposal of Fuel Cell Polyurethane Foam
TE-ENFE-86-1 (1 Nov. 1987): Electrically Conductive Explosion Suppression Material
*MS-MMSR-87-100 (12 Sept. 1988): A-10 Aircraft Electrically Conductive Explosion Suppression Material
*USAAVSCOM TR 89-D-16 (February 1990): Aircraft Fuel System Fire and Explosion Suppression Design Guide
WRDC-TR-90-4074 (28 Sept. 1990): Foam
L-P-378: Plastic Sheet and Strip
TT-I-1795: Ink
MIL-B-81705: Barrier Materials
MIL-B-83054 B (17 May 1978): Baffle and Inerting Material
*MIL-F-87168 (20 June 1983): Fire and Explosion Hazard Protection Systems
MIL-F-87260 (7 February 1992): Foam Material
MIL-G-5572: Gasoline
MIL-T-5578: Tank
MIL-T-5624: Turbine Fuel
MIL-T-6396: Tank Aircraft Propulsion Fluid Systems
MIL-T-83133: Turbine Fuel
MIL-STD-129: Markings for Shipment and Storage
ASTM D 2276-73: Test Methods for Particulate Contamination in Aviation Turbine Fuels
*ASTM D 910: Specification for Aviation Gasolines
*ASTM D 1655: Specification for Aviation Turbine Fuels
*71-GT-54: Effects of Polyurethane Foam on Fuel System Contamination
UL 94 Fourth Edition: Tests for Flammability of Plastics Materials for Parts in Devices and Appliances