全文阅读 全文下载 章节阅读

基本信息

【范围】

This document establishes test plans/procedures for the AS5643 Standard that by itself defines guidelines for the use of IEEE-1394b as a data bus network in military and aerospace vehicles. This test specification defines procedures and criteria for testing device compliance with the AS5643 Standard. 1.1 Purpose The purpose of this document is to establish test plans/procedures for the AS5643 Standard. This document is controlled and maintained by the SAE with technical support from subsystem vendors. 1.2 Application The information herein may be used to assist the test of the subsystems that interface via the vehicle’s network. 1.3 Interpretation The following interpretations shall be placed upon these words, unless stated otherwise, where they are used in this document. May An allowed action. Shall A mandatory requirement. Should A recommended action. Will A declaration of intent.strRefField

【与前一版的变化】

引用文件/被引文件

AS5643

IEEE-1394b Interface Requirements for Military and Aerospace Vehicle Applications

IEEE Std 1394-1995

IEEE Standard for a High Performance Serial Bus

IEEE Std 1394a-2000

IEEE Standard for a High Performance Serial Bus

IEEE Std 1394b-2002

IEEE Standard for a High Performance Serial Bus

MIL-STD-461E

Department of Defense Interface Standard

MIL-HDBK-454A

Department of Defense Handbook

MIL-HDBK-5400

Military Handbook

包含图表

TEST SEQUENCE	“BLACK BOX” TEST S	RHB REGISTER VALUES
MAX_PORT_SPEED REGIS	NEGOTIATED_SPEED REG	STANDARD LINK LAYER
STOF PACKET FIELD AN	CC GENERATED MESSAGE	REMOTE NODE GENERATE